Difference between revisions of "Category:Internet Space"

From NAS-Central Lacie Wiki
Jump to: navigation, search
(Specs)
m (Gaining root SSH access)
Line 68: Line 68:
 
== Gaining root SSH access ==
 
== Gaining root SSH access ==
 
Remove the casing, and connect the harddrive to a Linux pc.
 
Remove the casing, and connect the harddrive to a Linux pc.
Make sure you browse to the partition of about 3.1GB in size. (presumably /dev/sb1) This is the boot-partition.
+
Make sure you browse to the partition of about 3.1GB in size. (presumably /dev/sdb1) This is the boot-partition.
 
Somehow, only root can connect through SSH, so we should give the user root a password.
 
Somehow, only root can connect through SSH, so we should give the user root a password.
 
This is done in the file /etc/shadow
 
This is done in the file /etc/shadow

Revision as of 11:22, 19 September 2009

Introduction

It looks like this device is based on the Edmini drive from LaCie. Browsing it, I could see several 'edmini'-related files.

Specs

-bash-3.00# uname -a
Linux axentraserver.htpc.homelibrary.fr 2.6.12.6-arm1-lacie5b #3 Fri Apr 20 11:44:12 EDT 2007 armv5tejl armv5tejl armv5tejl GNU/Linux

-bash-3.00# cat /proc/cpuinfo 
Processor	: ARM926EJ-Sid(wb) rev 0 (v5l)
BogoMIPS	: 266.24
Features	: swp half thumb fastmult 
CPU implementer	: 0x41
CPU architecture: 5TEJ
CPU variant	: 0x0
CPU part	: 0x926
CPU revision	: 0
Cache type	: write-back
Cache clean	: cp15 c7 ops
Cache lockdown	: format C
Cache format	: Harvard
I size		: 32768
I assoc		: 1
I line length	: 32
I sets		: 1024
D size		: 32768
D assoc		: 1
D line length	: 32
D sets		: 1024

Hardware	: MV-88fxx81
Revision	: 0000
Serial		: 0000000000000000

-bash-3.00# cat /proc/meminfo 
MemTotal:        61320 kB
MemFree:          2120 kB
Buffers:         10556 kB
Cached:          24856 kB
SwapCached:         24 kB
Active:          42816 kB
Inactive:         8360 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        61320 kB
LowFree:          2120 kB
SwapTotal:      530136 kB
SwapFree:       530104 kB
Dirty:              20 kB
Writeback:           0 kB
Mapped:          32932 kB
Slab:             5152 kB
CommitLimit:    560796 kB
Committed_AS:    60888 kB
PageTables:        744 kB
VmallocTotal:   450560 kB
VmallocUsed:       816 kB
VmallocChunk:   449724 kB





  • mt-daapd runs on port 6689, visit <<LACIEIP>>:6689, log in with default user <anything> and default password 'sLPoe243'

Gaining root SSH access

Remove the casing, and connect the harddrive to a Linux pc. Make sure you browse to the partition of about 3.1GB in size. (presumably /dev/sdb1) This is the boot-partition. Somehow, only root can connect through SSH, so we should give the user root a password. This is done in the file /etc/shadow I copied the password from the user I created when first installing the LaCie Internet Space, so I knew that would work. That's it. Hook the drive up again, and now you can connect via SSH: ssh root@<LACIE IP>

guido@HTPC:~$ ssh root@192.168.2.77
Axentra HipServ version 10.0.x
root@192.168.2.77's password:

Pages in category "Internet Space"

This category contains only the following page.