Difference between revisions of "Category:Internet Space"

From NAS-Central Lacie Wiki
Jump to: navigation, search
m (→‎Gaining root SSH access)
Line 63: Line 63:
 
</pre>
 
</pre>
  
 +
=== Boot info ===
 +
<pre>
 +
-bash-3.00# dmesg
 +
Linux version 2.6.12.6-arm1-lacie5b (root@lacie) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #3 Fri Apr 20 11:44:12 EDT 2007
 +
CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ)
 +
CPU0: D VIVT write-back cache
 +
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
 +
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
 +
Machine: MV-88fxx81
 +
Using UBoot passing parameters structure
 +
Sys Clk = 200000000, Tclk = 166666667
 +
Memory policy: ECC disabled, Data cache writeback
 +
On node 0 totalpages: 16384
 +
  DMA zone: 16384 pages, LIFO batch:7
 +
  Normal zone: 0 pages, LIFO batch:1
 +
  HighMem zone: 0 pages, LIFO batch:1
 +
Built 1 zonelists
 +
Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro
 +
PID hash table entries: 512 (order: 9, 8192 bytes)
 +
Console: colour dummy device 80x30
 +
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
 +
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
 +
Memory: 64MB 0MB 0MB 0MB = 64MB total
 +
Memory: 61184KB available (3084K code, 465K data, 104K init)
 +
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
 +
Mount-cache hash table entries: 512
 +
CPU: Testing write buffer coherency: ok
 +
NET: Registered protocol family 16
 +
 +
CPU Interface
 +
-------------
 +
SDRAM_CS0 ....base 00000000, size  64MB
 +
SDRAM_CS1 ....disable
 +
SDRAM_CS2 ....disable
 +
SDRAM_CS3 ....disable
 +
PEX0_MEM ....base e0000000, size 128MB
 +
PEX0_IO ....base f2000000, size  1MB
 +
PCI0_MEM ....base e8000000, size 128MB
 +
PCI0_IO ....base f2100000, size  1MB
 +
INTER_REGS ....base f1000000, size  1MB
 +
DEVICE_CS0 ....no such
 +
DEVICE_CS1 ....base f4000000, size  16MB
 +
DEVICE_CS2 ....no such
 +
DEV_BOOCS ....base ff800000, size  8MB
 +
CRYPTO ENG ....base f0000000, size  64KB
 +
 +
  LaCie EDmini V2 (MV LSP Version 1.10.3.patch2_DB_NAS)-- RD-88F5182-EDMV2  Soc: 88F5182 A2
 +
 +
Detected Tclk 166666667 and SysClk 200000000
 +
Marvell USB EHCI Host controller #0: c045fb00
 +
Marvell USB EHCI Gadget controller #1: c045fa40
 +
pexBarOverlapDetect: winNum 2 overlap current 0
 +
mvPexInit:Warning :Bar 2 size is illigal
 +
it will be disabled
 +
please check Pex and CPU windows configuration
 +
PCI: bus0: Fast back to back transfers enabled
 +
PCI: bus1: Fast back to back transfers enabled
 +
SCSI subsystem initialized
 +
usbcore: registered new driver usbfs
 +
usbcore: registered new driver hub
 +
Use the XOR engines (offloading) for enhancing the following functions:
 +
  o RAID 5 Xor calculation
 +
  o kernel memcpy
 +
  o kenrel memzero
 +
  o copy user to/from kernel buffers
 +
Number of XOR engines to use: 2
 +
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
 +
inotify device minor=63
 +
Registering unionfs 1.1.5
 +
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
 +
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
 +
io scheduler noop registered
 +
io scheduler anticipatory registered
 +
io scheduler deadline registered
 +
io scheduler cfq registered
 +
loop: loaded (max 8 devices)
 +
Marvell Gigabit Ethernet Driver 'egiga':
 +
  o Ethernet descriptors in DRAM
 +
  o DRAM SW cache-coherency
 +
  o Checksum offload enabled
 +
  o Loading network interface 'eth0'
 +
Intergrated Sata device found
 +
scsi0 : Marvell SCSI to SATA adapter
 +
scsi1 : Marvell SCSI to SATA adapter
 +
  Vendor: SAMSUNG  Model: HD502JI          Rev: 1AA0
 +
  Type:  Direct-Access                      ANSI SCSI revision: 03
 +
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
 +
SCSI device sda: drive cache: write back
 +
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
 +
SCSI device sda: drive cache: write back
 +
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
 +
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
 +
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0,  type 0
 +
physmap flash device: 80000 at ff800000
 +
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
 +
Amd/Fujitsu Extended Query Table at 0x0040
 +
phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
 +
number of CFI chips: 1
 +
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
 +
cmdlinepart partition parsing not available
 +
RedBoot partition parsing not available
 +
ehci_platform ehci_platform.4523: EHCI Host Controller
 +
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
 +
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
 +
ehci_platform ehci_platform.4523: park 0
 +
ehci_platform ehci_platform.4523: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
 +
hub 1-0:1.0: USB hub found
 +
hub 1-0:1.0: 1 port detected
 +
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
 +
usbcore: registered new driver usblp
 +
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
 +
Initializing USB Mass Storage driver...
 +
usbcore: registered new driver usb-storage
 +
USB Mass Storage support registered.
 +
usbcore: registered new driver usbhid
 +
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
 +
mice: PS/2 mouse device common for all mice
 +
edmini_power 1.0 initialised
 +
md: linear personality registered as nr 1
 +
md: raid0 personality registered as nr 2
 +
md: raid1 personality registered as nr 3
 +
md: raid10 personality registered as nr 9
 +
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
 +
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
 +
NET: Registered protocol family 2
 +
IP: routing cache hash table of 512 buckets, 4Kbytes
 +
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
 +
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
 +
TCP: Hash tables configured (established 4096 bind 4096)
 +
ip_conntrack version 2.1 (512 buckets, 4096 max) - 248 bytes per conntrack
 +
ip_tables: (C) 2000-2002 Netfilter core team
 +
NET: Registered protocol family 1
 +
NET: Registered protocol family 17
 +
NET: Registered protocol family 5
 +
Loading I2C based RTC driver device interface.
 +
Found TWSI adapter with id: 0
 +
Found I2C RTC rs5c372 @ 0x32
 +
md: Autodetecting RAID arrays.
 +
md: autorun ...
 +
md: ... autorun DONE.
 +
EXT3-fs: mounted filesystem with ordered data mode.
 +
VFS: Mounted root (ext3 filesystem) readonly.
 +
Freeing init memory: 104K
 +
kjournald starting.  Commit interval 5 seconds
 +
EXT3-fs: mounted filesystem with ordered data mode.
 +
kjournald starting.  Commit interval 5 seconds
 +
EXT3 FS on sda1, internal journal
 +
EXT3-fs warning: checktime reached, running e2fsck is recommended
 +
kjournald starting.  Commit interval 5 seconds
 +
EXT3 FS on sda3, internal journal
 +
EXT3-fs: mounted filesystem with ordered data mode.
 +
Adding 530136k swap on /dev/sda2.  Priority:-1 extents:1
 +
eth0: link down
 +
eth0: link up<5>, full duplex<5>, speed 100 Mbps<5>
 +
fuse init (API version 7.8)
 +
fuse distribution version: 2.6.3
 +
tun: Universal TUN/TAP device driver, 1.6
 +
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
 +
</pre>
  
 
* mt-daapd runs on port 6689, visit <<LACIEIP>>:6689, log in with default user <anything> and default password 'sLPoe243'
 
* mt-daapd runs on port 6689, visit <<LACIEIP>>:6689, log in with default user <anything> and default password 'sLPoe243'

Revision as of 19:28, 28 September 2009

Introduction

It looks like this device is based on the Edmini drive from LaCie. Browsing it, I could see several 'edmini'-related files.

Specs

-bash-3.00# uname -a
Linux axentraserver.htpc.homelibrary.fr 2.6.12.6-arm1-lacie5b #3 Fri Apr 20 11:44:12 EDT 2007 armv5tejl armv5tejl armv5tejl GNU/Linux

-bash-3.00# cat /proc/cpuinfo 
Processor	: ARM926EJ-Sid(wb) rev 0 (v5l)
BogoMIPS	: 266.24
Features	: swp half thumb fastmult 
CPU implementer	: 0x41
CPU architecture: 5TEJ
CPU variant	: 0x0
CPU part	: 0x926
CPU revision	: 0
Cache type	: write-back
Cache clean	: cp15 c7 ops
Cache lockdown	: format C
Cache format	: Harvard
I size		: 32768
I assoc		: 1
I line length	: 32
I sets		: 1024
D size		: 32768
D assoc		: 1
D line length	: 32
D sets		: 1024

Hardware	: MV-88fxx81
Revision	: 0000
Serial		: 0000000000000000

-bash-3.00# cat /proc/meminfo 
MemTotal:        61320 kB
MemFree:          2120 kB
Buffers:         10556 kB
Cached:          24856 kB
SwapCached:         24 kB
Active:          42816 kB
Inactive:         8360 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        61320 kB
LowFree:          2120 kB
SwapTotal:      530136 kB
SwapFree:       530104 kB
Dirty:              20 kB
Writeback:           0 kB
Mapped:          32932 kB
Slab:             5152 kB
CommitLimit:    560796 kB
Committed_AS:    60888 kB
PageTables:        744 kB
VmallocTotal:   450560 kB
VmallocUsed:       816 kB
VmallocChunk:   449724 kB

Boot info

-bash-3.00# dmesg
Linux version 2.6.12.6-arm1-lacie5b (root@lacie) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #3 Fri Apr 20 11:44:12 EDT 2007
CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ)
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
Machine: MV-88fxx81
Using UBoot passing parameters structure
Sys Clk = 200000000, Tclk = 166666667
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:7
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB 0MB 0MB 0MB = 64MB total
Memory: 61184KB available (3084K code, 465K data, 104K init)
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16

CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size  64MB 
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB 
PEX0_IO ....base f2000000, size   1MB 
PCI0_MEM ....base e8000000, size 128MB 
PCI0_IO ....base f2100000, size   1MB 
INTER_REGS ....base f1000000, size   1MB 
DEVICE_CS0 ....no such
DEVICE_CS1 ....base f4000000, size  16MB 
DEVICE_CS2 ....no such
DEV_BOOCS ....base ff800000, size   8MB 
CRYPTO ENG ....base f0000000, size  64KB 

  LaCie EDmini V2 (MV LSP Version 1.10.3.patch2_DB_NAS)-- RD-88F5182-EDMV2  Soc: 88F5182 A2

 Detected Tclk 166666667 and SysClk 200000000 
Marvell USB EHCI Host controller #0: c045fb00
Marvell USB EHCI Gadget controller #1: c045fa40
pexBarOverlapDetect: winNum 2 overlap current 0
mvPexInit:Warning :Bar 2 size is illigal
it will be disabled
please check Pex and CPU windows configuration
PCI: bus0: Fast back to back transfers enabled
PCI: bus1: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Use the XOR engines (offloading) for enhancing the following functions:
  o RAID 5 Xor calculation
  o kernel memcpy
  o kenrel memzero
  o copy user to/from kernel buffers
Number of XOR engines to use: 2
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
inotify device minor=63
Registering unionfs 1.1.5
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
Marvell Gigabit Ethernet Driver 'egiga':
  o Ethernet descriptors in DRAM
  o DRAM SW cache-coherency
  o Checksum offload enabled
  o Loading network interface 'eth0' 
Intergrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
  Vendor: SAMSUNG   Model: HD502JI           Rev: 1AA0
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0,  type 0
physmap flash device: 80000 at ff800000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
ehci_platform ehci_platform.4523: EHCI Host Controller
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
ehci_platform ehci_platform.4523: park 0
ehci_platform ehci_platform.4523: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
edmini_power 1.0 initialised
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 248 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
Loading I2C based RTC driver device interface.
Found TWSI adapter with id: 0
Found I2C RTC rs5c372 @ 0x32
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing init memory: 104K
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs warning: checktime reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 530136k swap on /dev/sda2.  Priority:-1 extents:1
eth0: link down
eth0: link up<5>, full duplex<5>, speed 100 Mbps<5>
fuse init (API version 7.8)
fuse distribution version: 2.6.3
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  • mt-daapd runs on port 6689, visit <<LACIEIP>>:6689, log in with default user <anything> and default password 'sLPoe243'

Gaining root SSH access

Remove the casing, and connect the harddrive to a Linux pc. Make sure you browse to the partition of about 3.1GB in size. (presumably /dev/sdb1) This is the boot-partition. Somehow, only root can connect through SSH, so we should give the user root a password. This is done in the file /etc/shadow I copied the password from the user I created when first installing the LaCie Internet Space, so I knew that would work. That's it. Hook the drive up again, and now you can connect via SSH: ssh root@<LACIE IP> 

guido@HTPC:~$ ssh root@192.168.2.77
Axentra HipServ version 10.0.x
root@192.168.2.77's password:

Pages in category "Internet Space"

This category contains only the following page.

P

Retrieved from "http://lacie.nas-central.org/w/index.php?title=Category:Internet_Space&oldid=849"