Category:Internet Space 2

From NAS-Central Lacie Wiki
Jump to: navigation, search
Internet Space 2
CPU Feroceon 88FR131 rev 1 (v5l) (ARMv5TE) (also says 88F6281 at boot)
RAM 128 MB
Flash ROM 512 kB
Other internal serial port
NIC 1 Gbit
USB one host port on back (in contrast with the Networkspace 2, which has a device port here)
internal HDD 1 TB (Hitachi)
IDE Controller none present
SATA Controller 1x
Drive Capacity 1 TB (marketed)
Fan none (but it wouldn't hurt)

System data

cat /proc/cpuinfo

root@grace:~# cat /proc/cpuinfo
Processor       : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS        : 797.90
Features        : swp half thumb fastmult edsp 
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant     : 0x2
CPU part        : 0x131
CPU revision    : 1

Hardware        : LaCie Internet Space v2
Revision        : 0000
Serial          : 0000000000000000

cat /proc/meminfo

root@grace:~# cat /proc/meminfo
MemTotal:         123760 kB
MemFree:            5344 kB
Buffers:            1296 kB
Cached:            63636 kB
SwapCached:        10512 kB
Active:            41272 kB
Inactive:          67084 kB
Active(anon):      11804 kB
Inactive(anon):    31640 kB
Active(file):      29468 kB
Inactive(file):    35444 kB
Unevictable:           0 kB
Mlocked:               0 kB
SwapTotal:       1048572 kB
SwapFree:        1007048 kB
Dirty:                44 kB
Writeback:             0 kB
AnonPages:         35132 kB
Mapped:             4028 kB
Shmem:                20 kB
Slab:               5140 kB
SReclaimable:       2052 kB
SUnreclaim:         3088 kB
KernelStack:        1280 kB
PageTables:         1392 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     1110452 kB
Committed_AS:     238580 kB
VmallocTotal:     884736 kB
VmallocUsed:         632 kB
VmallocChunk:     884056 kB

This information comes from a fresh new debian installation: swap space might not be the same as in the original configuration.

cat /proc/mtd

root@grace:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00080000 00001000 "u-boot"


PCB front
PCB Back

Cable is for front led.

Obtain SSH access

Follow the same procedure as described for Internet Space.

Serial port access

As in Network Space 2. Remember to enable a serial console in /etc/inittab:

T0:23:respawn:/sbin/getty -L ttyS0 115200 vt100 

Install Debian

Coming soon.

This category currently contains no pages or media.