D2 Network:jtag serial

From NAS-Central Lacie Wiki
Revision as of 12:17, 8 January 2010 by Niccolo (Talk | contribs) (Created page with 'Once disassembled you can see the '''JTAG 8 pin connector''', pin 1 is toward the hard disk, pin 8 is toward the power switch. This is a 3.3 volt serial port, to connect it to a…')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Once disassembled you can see the JTAG 8 pin connector, pin 1 is toward the hard disk, pin 8 is toward the power switch.

This is a 3.3 volt serial port, to connect it to a standard one we need an adapter, like those based on the MAX232 chip.

The U-Boot boot loader will write to the serial port at 115200,8,N,1, so the kernel during bootstrap. Once started the system will spawn a getty on the same serial port, with the same baud rate. On the original system, only root can login, but we don't know its password.