Information from a running EDmini v2

From NAS-Central Lacie Wiki
Revision as of 21:28, 9 November 2010 by Mijzelf (Talk | contribs) (Created page with "Firmware === cat /proc/version === Linux version (root@lacie) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #1 Tue Oct 31 11:26:21 CET …")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


cat /proc/version

Linux version (root@lacie) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #1 Tue Oct 31 11:26:21 CET 2006

cat /proc/cpuinfo

Processor	: ARM926EJ-Sid(wb) rev 0 (v5l)
BogoMIPS	: 266.24
Features	: swp half thumb fastmult 
CPU implementer	: 0x41
CPU architecture: 5TEJ
CPU variant	: 0x0
CPU part	: 0x926
CPU revision	: 0
Cache type	: write-back
Cache clean	: cp15 c7 ops
Cache lockdown	: format C
Cache format	: Harvard
I size		: 32768
I assoc		: 1
I line length	: 32
I sets		: 1024
D size		: 32768
D assoc		: 1
D line length	: 32
D sets		: 1024

Hardware	: MV-88fxx81
Revision	: 0000
Serial		: 0000000000000000

cat /proc/meminfo

MemTotal:        61632 kB
MemFree:         24528 kB
Buffers:          3108 kB
Cached:          23324 kB
SwapCached:          0 kB
Active:          17688 kB
Inactive:        12540 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        61632 kB
LowFree:         24528 kB
SwapTotal:      128448 kB
SwapFree:       128448 kB
Dirty:              12 kB
Writeback:           0 kB
Mapped:           9000 kB
Slab:             4352 kB
CommitLimit:    159264 kB
Committed_AS:    21124 kB
PageTables:        336 kB
VmallocTotal:   450560 kB
VmallocUsed:       716 kB
VmallocChunk:   449844 kB

cat /proc/partitions

major minor  #blocks  name

   8     0  244198584 sda
   8     1          1 sda1
   8     2  243191970 sda2
   8     5     128457 sda5
   8     6       8001 sda6
   8     7       8001 sda7
   8     8     128488 sda8
   8     9     730926 sda9
  31     0        512 mtdblock0

cat /proc/mounts

rootfs / rootfs rw 0 0
/dev/root /oldroot ext3 ro 0 0
/proc /oldroot/proc proc rw,nodiratime 0 0
/dev/sda8 /oldroot/var/original ext3 ro 0 0
/dev/sda9 /oldroot/snapshots ext3 rw 0 0
unionfs / unionfs rw,dirs=/oldroot/snapshots/snaps/02=rw:/oldroot/snapshots/snaps/01=ro:/oldroot/snapshots/snaps/00=ro:/oldroot/var/original=ro,debug=0,delete=all,copyup=preserve 0 0
none /proc proc rw,nodiratime 0 0
none /sys sysfs rw 0 0
none /proc/bus/usb usbfs rw 0 0
/dev/sda9 /var ext3 rw 0 0
/dev/sda9 /tmp ext3 rw 0 0
/dev/sda2 /home xfs rw 0 0

cat /proc/modules

ntfs 114832 0 - Live 0xbf0e4000
g_ether 26252 0 - Live 0xbf0dc000
mv_usb_gadget 50444 1 g_ether, Live 0xbf0ce000
reiserfs 263060 0 - Live 0xbf08c000
xfs 567392 1 - Live 0xbf000000

cat /proc/filesystems

nodev	sysfs
nodev	rootfs
nodev	bdev
nodev	proc
nodev	sockfs
nodev	usbfs
nodev	pipefs
nodev	futexfs
nodev	tmpfs
nodev	eventpollfs
nodev	devpts
nodev	ramfs
nodev	unionfs

fdisk -l /dev/sda

Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/sda1               1         125     1004031    5  Extended
/dev/sda2             126       30401   243191970   83  Linux
/dev/sda5               1          16      128457   82  Linux swap
/dev/sda6              17          17        8001   83  Linux
/dev/sda7              18          18        8001   83  Linux
/dev/sda8              19          34      128488+  83  Linux
/dev/sda9              35         125      730926   83  Linux


Linux version (root@lacie) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #1 Tue Oct 31 11:26:21 CET 2006
CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ)
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
Machine: MV-88fxx81
Using UBoot passing parameters structure
Sys Clk = 133000000, Tclk = 166666667
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:7
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB 0MB 0MB 0MB = 64MB total
Memory: 61440KB available (2817K code, 416K data, 96K init)
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16

CPU Interface
SDRAM_CS0 ....base 00000000, size  64MB 
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB 
PEX0_IO ....base f2000000, size   1MB 
PCI0_MEM ....base e8000000, size 128MB 
PCI0_IO ....base f2100000, size   1MB 
INTER_REGS ....base f1000000, size   1MB 
DEVICE_CS1 ....base f4000000, size  16MB 
DEV_BOOCS ....base ff800000, size   8MB 
CRYPTO ENG ....base f0000000, size  64KB 

  LaCie EDmini V2 (MV LSP Version 1.10.3.patch2_DB_NAS)-- RD-88F5182-EDMV2  Soc: 88F5182 A2

 Detected Tclk 166666667 and SysClk 133000000 
Marvell USB EHCI Host controller #0: c3c11b00
Marvell USB EHCI Gadget controller #1: c3c11a40
pexBarOverlapDetect: winNum 2 overlap current 0
mvPexInit:Warning :Bar 2 size is illigal
it will be disabled
please check Pex and CPU windows configuration
PCI: bus0: Fast back to back transfers enabled
PCI: bus1: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Use the XOR engines (offloading) for enhancing the following functions:
  o RAID 5 Xor calculation
  o kernel memcpy
  o kenrel memzero
  o copy user to/from kernel buffers
Number of XOR engines to use: 2
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
inotify device minor=63
Registering unionfs 1.1.5
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
Marvell Gigabit Ethernet Driver 'egiga':
  o Ethernet descriptors in DRAM
  o DRAM SW cache-coherency
  o Checksum offload enabled
  o Loading network interface 'egiga0' 
Intergrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
  Vendor: SAMSUNG   Model: SP2504C           Rev: VT10
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
 sda: sda1 < sda5 sda6 sda7 sda8 sda9 > sda2
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0,  type 0
physmap flash device: 80000 at ff800000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
ehci_platform ehci_platform.4523: EHCI Host Controller
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
ehci_platform ehci_platform.4523: park 0
ehci_platform ehci_platform.4523: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
edmini_power 1.0 initialised
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
Loading I2C based RTC driver device interface.
Found TWSI adapter with id: 0
Found I2C RTC rs5c372 @ 0x32
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing init memory: 96K
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SGI XFS with ACLs, no debug enabled
mv_gadget: version 05-July-2006 loaded
USB-1 Gadget driver probed
USB underrun WA: idma=1, streaming=1, threshold=64, SRAM: base=f0000000, size=8192, parts=2
USB init: CAP_REGS=0xf10a0100, DEV_REGS=0xf10a0140, MAX_EP=4
USB EP_QH: Base=f0000000 (0xf0000000), Aligned(2048)=f0000000, Size=512
USB dTD(48): Base=f0000200 (0xf0000200), Aligned(32)=f0000200, Size=1536, Scratch=c3475c00
USB WA_Queue: base=f0000800, size=6144, parts=2
USB Init: Wait for RESET completed
USB Init: RESET completed
device_init: pDev=0xc3d72800, pXD(32)=0xc3d72400, pSCRATCH(32)=0xc3532c00, pTempXD=0xc34878e0
usb0: Ethernet Gadget, version: May Day 2005
usb0: using mv_gadget, OUT ep1out IN ep1in STATUS ep2in
usb0: MAC d2:03:7c:4b:6e:7e
usb0: HOST MAC 00:d0:4b:d4:81:c9
usb0: RNDIS ready
registered Marvell USB-1 gadget driver ether
NTFS driver 2.1.22 [Flags: R/O MODULE].
Adding 128448k swap on /dev/sda5.  Priority:-1 extents:1
VFS: Can't find ext3 filesystem on dev sda2.
VFS: Can't find an ext2 filesystem on dev sda2.
FAT: bogus number of FAT structure
VFS: Can't find a valid FAT filesystem on dev sda2.
Unable to identify CD-ROM format.
HFS+-fs: unable to find HFS+ superblock
VFS: Can't find a HFS filesystem on dev sda2.
UDF-fs: No VRS found
XFS mounting filesystem sda2
Starting XFS recovery on filesystem: sda2 (dev: sda2)
Ending XFS recovery on filesystem: sda2 (dev: sda2)
egiga0: link down
egiga0: link up<5>, full duplex<5>, speed 100 Mbps<5>