Category:Ethernet Disk RAID

From NAS-Central Lacie Wiki
Jump to: navigation, search
This article is currently a stub. You can help this Wiki by expanding it

. This template will categorize articles that include it into Category:Stubs.

Ethernet Disk RAID.jpg
Ethernet Disk RAID
CPU 400-MHz Intel® IOP80219
RAM 256 MB 32-bit DDR SDRAM
Flash ROM 32-MB NOR Flash
Other
NIC Two Intel® gigabit LAN port interface
USB Two USB 2.0 connectors
internal HDD up to four 3.5-in SATA-I hard drives from 80 GB to 500 GB
IDE Controller no
SATA Controller (yes)
Drive Capacity up to 2TB (more with newer firmware?)
Fan

To gain shell access, navigate to a hidden page https://yourdisk/ssh_controlF.cgi and set SSH to "On" Default username is "root", password - should match one used by "admin" in the web manager.

NAS configuration is stored in file /usr/local/ipstor/etc/unas.conf

# uname -a
Linux Teradisk 2.6.10-iop1-9 #1 Thu Nov 2 21:34:13 CST 2006 armv5tel unknown

# cat /proc/cpuinfo 
Processor       : XScale-IOP8032x Family rev 0 (v5l)
BogoMIPS        : 395.67
cpu MHz         : 395.673
Features        : swp half thumb fastmult edsp 
CPU implementer : 0x69
CPU architecture: 5TE
CPU variant     : 0x0
CPU part        : 0x2e2
CPU revision    : 0
Cache type      : undefined 5
Cache clean     : undefined 5
Cache lockdown  : undefined 5
Cache format    : Harvard
I size          : 32768
I assoc         : 32
I line length   : 32
I sets          : 32
D size          : 32768
D assoc         : 32
D line length   : 32
D sets          : 32

Hardware        : Intel IQ31244

# mount
/dev/md0 on / type ext3 (rw)
none on /proc type proc (rw,nodiratime)
/dev/vbdi2 on /nas/NASDisk-00002 type xfs (rw,nosuid,usrquota)

This category currently contains no pages or media.