EDmini:Stock Linux Information
From NAS-Central Lacie Wiki
Contents |
/proc/cpuinfo
processor : 0 cpu : 8280 revision : 32.17 (pvr 8082 2011) bogomips : 175.71 machine : Motorola IceCube cpu MHz : 264 bus MHz : 132 ipb MHz : 132 pci MHz : 33
/proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 62488576 21626880 40861696 0 1560576 10997760
Swap: 131530752 0 131530752
MemTotal: 61024 kB
MemFree: 39904 kB
MemShared: 0 kB
Buffers: 1524 kB
Cached: 10740 kB
SwapCached: 0 kB
Active: 5068 kB
Inactive: 10840 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 61024 kB
LowFree: 39904 kB
SwapTotal: 128448 kB
SwapFree: 128448 kB
/proc/mtd
dev: size erasesize name
/lib/libc.so.6
libc.so.6 -> libc-2.3.1.so
uname -a
Linux atlantis 2.4.25-lacie6 #1 mer jun 8 18:54:39 CEST 2005 ppc unknown
lsmod
not available!
mount
/dev/hda8 on /mnt/lacie type ext3 (rw) /dev/loop0 on /home type ext3 (rw)
/proc/mounts
rootfs / rootfs rw 0 0 /dev/root / ext3 ro 0 0 none /proc proc rw 0 0 /dev/hda8 /mnt/lacie ext3 rw 0 0 none /dev ramfs rw 0 0 /dev/hda8 /etc ext3 rw 0 0 /dev/hda8 /var ext3 rw 0 0 /dev/hda8 /tmp ext3 rw 0 0 /dev/loop0 /home ext3 rw 0 0
dmesg
Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb Linux version 2.4.25-lacie6 (bertrand@neo.lacie.com) (gcc version 3.2.2 20030217 (Yellow Dog Linux 3.0 3.2.2-2a_1)) #1 mer jun 8 18:54:39 CEST 2005 On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda7 Calibrating delay loop... 175.71 BogoMIPS Memory: 60948k available (2340k kernel code, 888k data, 76k init, 0k highmem) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware PCI: Cannot allocate resource region 0 of device 00:1a.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded NTFS driver v1.1.22 [Flags: R/O] SGI XFS with no debug enabled i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) i2c-core.o: driver i2c-dev dummy driver registered. i2c-algo-bit.o: i2c bit algorithm module i2c-proc.o version 2.6.1 (20010830) pty: 256 Unix98 ptys configured ttyS0 on PSC1 ttyS1 on PSC2 rs5c372.o: RS5C372 I2C based RTC driver. i2c-core.o: driver RS5C372 registered. Generic RTC Driver v1.07 loop: loaded (max 8 devices) ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Port Config is: 0x11050004 ipb=132MHz, set clock period to 7 GPIO config: 11050004 ATA invalid: 01000000 ATA hostcnf: 03000000 ATA pio1 : 100a0a00 ATA pio2 : 02040600 XLB Arb cnf: 00002366 mpc5xxx_ide: Setting up IDE interface ide0... ATA DMA task: 5 Probing IDE interface ide0... hda: ST3250823A, ATA DISK drive hda: Setting UDMA 2 timings hda: Setting PIO 4 timings ide0 at 0xf0003a60-0xf0003a67,0xf0003a5c on irq 45 hda: attached ide-disk driver. hda: host protected area => 1 hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33) Partition check: hda:<7>Unhandled interrupt 1a, disabled hda1 < hda5 hda6 hda7 hda8 > hda2 hda3 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices NFTL driver: nftlcore.c $Revision: 1.94 $, nftlmount.c $Revision: 1.34 $ INFTL: inftlcore.c $Revision: 1.14 $, inftlmount.c $Revision: 1.12 $ Probe at base[0x55](0x00000055) past the end of the map(0x00000000) Probe at base[0x55](0x00000055) past the end of the map(0x00000000) CFI: Found no Icecube Bank 0 device at location zero Icecube: No supported flash chips found! i2c-dev.o: Registered 'Icecube I2C module #2 interface' as minor 0 i2c-core.o: client [RS5C372] registered to adapter [Icecube I2C module #2 interface](pos. 0). i2c-core.o: adapter Icecube I2C module #2 interface registered as adapter 0. i2c-algo-5xxx.o: scanning bus Icecube I2C module #2 interface... ..................................................(0x32).............................(0x50)..............................................(0x7f) i2c-icecube.o: I2C module #2 installed edmini_power 1.0 initialised i2c_eeprom.o: I2C EEPROM driver. i2c-core.o: driver I2C EEPROM registered. i2c-core.o: client [I2C EEPROM] registered to adapter [Icecube I2C module #2 interface](pos. 1). EDmini setting up MAC address NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: AppleTalk 0.18a for Linux NET4.0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 76k init kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs: Unrecognized mount option umask EXT2-fs: Unrecognized mount option umask FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 07:00. Unable to identify CD-ROM format. HFS+-fs: unable to find HFS+ superblock VFS: Can't find a HFS filesystem on dev 07:00. reiserfs_getopt: unknown option "umask=002" jfs: Unrecognized mount option umask XFS: unknown mount option [umask]. kjournald starting. Commit interval 5 seconds EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on loop(7,0), internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding Swap: 128448k swap-space (priority -1) eth0: Phy @ 0x1, type ICS 1893 (0x0015f442) eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. eth0: status: link up, 100 Mbps Full Duplex, auto-negotiation complete.
