Information from a running EDmini v2
From NAS-Central Lacie Wiki
Firmware 1.1.2.1
Contents |
cat /proc/version
Linux version 2.6.12.6-arm1-lacie5a (root@lacie) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #1 Tue Oct 31 11:26:21 CET 2006
cat /proc/cpuinfo
Processor : ARM926EJ-Sid(wb) rev 0 (v5l) BogoMIPS : 266.24 Features : swp half thumb fastmult CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0x926 CPU revision : 0 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 32768 I assoc : 1 I line length : 32 I sets : 1024 D size : 32768 D assoc : 1 D line length : 32 D sets : 1024 Hardware : MV-88fxx81 Revision : 0000 Serial : 0000000000000000
cat /proc/meminfo
MemTotal: 61632 kB MemFree: 24528 kB Buffers: 3108 kB Cached: 23324 kB SwapCached: 0 kB Active: 17688 kB Inactive: 12540 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 61632 kB LowFree: 24528 kB SwapTotal: 128448 kB SwapFree: 128448 kB Dirty: 12 kB Writeback: 0 kB Mapped: 9000 kB Slab: 4352 kB CommitLimit: 159264 kB Committed_AS: 21124 kB PageTables: 336 kB VmallocTotal: 450560 kB VmallocUsed: 716 kB VmallocChunk: 449844 kB
cat /proc/partitions
major minor #blocks name 8 0 244198584 sda 8 1 1 sda1 8 2 243191970 sda2 8 5 128457 sda5 8 6 8001 sda6 8 7 8001 sda7 8 8 128488 sda8 8 9 730926 sda9 31 0 512 mtdblock0
cat /proc/mounts
rootfs / rootfs rw 0 0 /dev/root /oldroot ext3 ro 0 0 /proc /oldroot/proc proc rw,nodiratime 0 0 /dev/sda8 /oldroot/var/original ext3 ro 0 0 /dev/sda9 /oldroot/snapshots ext3 rw 0 0 unionfs / unionfs rw,dirs=/oldroot/snapshots/snaps/02=rw:/oldroot/snapshots/snaps/01=ro:/oldroot/snapshots/snaps/00=ro:/oldroot/var/original=ro,debug=0,delete=all,copyup=preserve 0 0 none /proc proc rw,nodiratime 0 0 none /sys sysfs rw 0 0 none /proc/bus/usb usbfs rw 0 0 /dev/sda9 /var ext3 rw 0 0 /dev/sda9 /tmp ext3 rw 0 0 /dev/sda2 /home xfs rw 0 0
cat /proc/modules
ntfs 114832 0 - Live 0xbf0e4000 g_ether 26252 0 - Live 0xbf0dc000 mv_usb_gadget 50444 1 g_ether, Live 0xbf0ce000 reiserfs 263060 0 - Live 0xbf08c000 xfs 567392 1 - Live 0xbf000000
cat /proc/filesystems
nodev sysfs nodev rootfs nodev bdev nodev proc nodev sockfs nodev usbfs nodev pipefs nodev futexfs nodev tmpfs nodev eventpollfs nodev devpts ext3 ext2 nodev ramfs vfat iso9660 hfsplus hfs udf nodev unionfs xfs reiserfs ntfs
fdisk -l /dev/sda
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 125 1004031 5 Extended /dev/sda2 126 30401 243191970 83 Linux /dev/sda5 1 16 128457 82 Linux swap /dev/sda6 17 17 8001 83 Linux /dev/sda7 18 18 8001 83 Linux /dev/sda8 19 34 128488+ 83 Linux /dev/sda9 35 125 730926 83 Linux
dmesg
Linux version 2.6.12.6-arm1-lacie5a (root@lacie) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #1 Tue Oct 31 11:26:21 CET 2006 CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) CPU0: D VIVT write-back cache CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets Machine: MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 133000000, Tclk = 166666667 Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 16384 DMA zone: 16384 pages, LIFO batch:7 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 64MB 0MB 0MB 0MB = 64MB total Memory: 61440KB available (2817K code, 416K data, 96K init) Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 64MB SDRAM_CS1 ....disable SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PCI0_MEM ....base e8000000, size 128MB PCI0_IO ....base f2100000, size 1MB INTER_REGS ....base f1000000, size 1MB DEVICE_CS0 ....no such DEVICE_CS1 ....base f4000000, size 16MB DEVICE_CS2 ....no such DEV_BOOCS ....base ff800000, size 8MB CRYPTO ENG ....base f0000000, size 64KB LaCie EDmini V2 (MV LSP Version 1.10.3.patch2_DB_NAS)-- RD-88F5182-EDMV2 Soc: 88F5182 A2 Detected Tclk 166666667 and SysClk 133000000 Marvell USB EHCI Host controller #0: c3c11b00 Marvell USB EHCI Gadget controller #1: c3c11a40 pexBarOverlapDetect: winNum 2 overlap current 0 mvPexInit:Warning :Bar 2 size is illigal it will be disabled please check Pex and CPU windows configuration PCI: bus0: Fast back to back transfers enabled PCI: bus1: Fast back to back transfers enabled SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub Use the XOR engines (offloading) for enhancing the following functions: o RAID 5 Xor calculation o kernel memcpy o kenrel memzero o copy user to/from kernel buffers Number of XOR engines to use: 2 Fast Floating Point Emulator V0.9 (c) Peter Teichmann. inotify device minor=63 Registering unionfs 1.1.5 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered loop: loaded (max 8 devices) Marvell Gigabit Ethernet Driver 'egiga': o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface 'egiga0' Intergrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter Vendor: SAMSUNG Model: SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: sda1 < sda5 sda6 sda7 sda8 sda9 > sda2 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 physmap flash device: 80000 at ff800000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 phys_mapped_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available ehci_platform ehci_platform.4523: EHCI Host Controller ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000 ehci_platform ehci_platform.4523: park 0 ehci_platform ehci_platform.4523: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice edmini_power 1.0 initialised md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid10 personality registered as nr 9 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 5 Loading I2C based RTC driver device interface. Found TWSI adapter with id: 0 Found I2C RTC rs5c372 @ 0x32 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing init memory: 96K kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. SGI XFS with ACLs, no debug enabled mv_gadget: version 05-July-2006 loaded USB-1 Gadget driver probed USB underrun WA: idma=1, streaming=1, threshold=64, SRAM: base=f0000000, size=8192, parts=2 USB init: CAP_REGS=0xf10a0100, DEV_REGS=0xf10a0140, MAX_EP=4 USB EP_QH: Base=f0000000 (0xf0000000), Aligned(2048)=f0000000, Size=512 USB dTD(48): Base=f0000200 (0xf0000200), Aligned(32)=f0000200, Size=1536, Scratch=c3475c00 USB WA_Queue: base=f0000800, size=6144, parts=2 USB Init: Wait for RESET completed USB Init: RESET completed device_init: pDev=0xc3d72800, pXD(32)=0xc3d72400, pSCRATCH(32)=0xc3532c00, pTempXD=0xc34878e0 usb0: Ethernet Gadget, version: May Day 2005 usb0: using mv_gadget, OUT ep1out IN ep1in STATUS ep2in usb0: MAC d2:03:7c:4b:6e:7e usb0: HOST MAC 00:d0:4b:d4:81:c9 usb0: RNDIS ready registered Marvell USB-1 gadget driver ether NTFS driver 2.1.22 [Flags: R/O MODULE]. Adding 128448k swap on /dev/sda5. Priority:-1 extents:1 VFS: Can't find ext3 filesystem on dev sda2. VFS: Can't find an ext2 filesystem on dev sda2. FAT: bogus number of FAT structure VFS: Can't find a valid FAT filesystem on dev sda2. Unable to identify CD-ROM format. HFS+-fs: unable to find HFS+ superblock VFS: Can't find a HFS filesystem on dev sda2. UDF-fs: No VRS found XFS mounting filesystem sda2 Starting XFS recovery on filesystem: sda2 (dev: sda2) Ending XFS recovery on filesystem: sda2 (dev: sda2) egiga0: link down egiga0: link up<5>, full duplex<5>, speed 100 Mbps<5>
